Free Shipping Australia-Wide

  • 0 items in quote

    No products in the Quote Basket.

  • YANMAR eG100i-6CR Inverter Diesel Generator

    $0

    This product includes:

    • Prime Power: 7.0 kVA / 7.0 kW
    • Standby Power: 7.5 kVA / 7.5 kW
    • Engine: YANMAR 2TNV70-4S0 (2-cylinder, water-cooled diesel)
    • Phase: Single-phase
    • Inverter: Yes — CVCP voltage & frequency control system
    • Configuration: Silent type (acoustic enclosure)
    • Noise Level: 63.5 dB(A) @ 1m (100% load)
    • Fuel Tank: 30L
    • Application: Homes, Remote Power, Off-Grid Backup, Commercial Backup
    Enquire Now

    Pure Power, Precisely Controlled

    The YANMAR eG100i-6CR is the world’s first inverter diesel generator in its class — a compact, water-cooled single-phase unit that delivers high-quality pure sine wave output for sensitive equipment including computers, televisions, and medical devices, as well as inductive loads like pumps and motors.

    At the heart of the eG100i is YANMAR’s CVCP (Constant Voltage & Constant Phase) inverter system, which continuously regulates both voltage and frequency regardless of load variation. Total Harmonic Distortion (THD) is held to 1% or less — significantly cleaner than the approximately 19% THD typical of a conventional synchronous generator. The result is stable, reliable power that won’t damage sensitive electronics.

    Energy-Saving Operation

    Unlike a conventional generator that runs at a fixed RPM, the eG100i’s energy-saving system continuously adjusts engine speed to match the actual load. This makes it up to 20% more fuel-efficient than comparable models, while also reducing noise at part load. The expanded 30L fuel tank supports over 14 hours of continuous operation at 70% load.

    Compact and Lightweight

    The combination of YANMAR’s vertical water-cooled diesel engine and a PMA (Permanent Magnet Alternator) enables a lightweight, compact design with excellent portability — making the eG100i well suited to remote sites and applications where space or transport logistics matter.

    Automatic Start/Stop Ready

    The eG100i-6CR includes a terminal for AMF/ATS panels as standard, allowing the unit to be configured to start automatically when mains power fails and shut down when it’s restored. This makes it a capable hands-off standby solution for homes, small businesses, and remote properties.

    Prime Power7.0 kVA / 7.0 kW
    Standby Power7.5 kVA / 7.5 kW
    Frequency50 Hz
    Voltage220–240V (single-phase, 2-wire)
    Engine ModelYANMAR 2TNV70-4S0
    Cylinders2
    Engine TypeVertical 4-cycle, water-cooled diesel
    AspirationNatural aspiration
    Combustion SystemIndirect injection (IDI)
    LubricationForced lubrication by trochoid pump
    Starting SystemElectric starting
    Inverter SystemCVCP (voltage & frequency control)
    AlternatorPMA (Permanent Magnet Alternator), single-phase, 2-wire
    Insulation ClassClass B
    ExcitationPMA type
    Revolutions1500–3600 rpm (variable, inverter-controlled)
    FuelDiesel (BS2869:A1 or equivalent)
    Fuel Tank Capacity30L
    Fuel Consumption @ 100% load3.1 L/hr
    Fuel Consumption @ 75% load2.0 L/hr
    Noise Level @ 100% load, 1m63.5 dB(A)
    Noise Level @ 75% load, 1m67.5 dB(A)
    ConfigurationSilent type (acoustic enclosure)
    Dimensions (L × W × H)1090 × 647 × 880 mm
    Dry Weight257 kg

    Brands we supply and support

    Testimonials

    We couldn’t be happier with the service we received from Jason Fisher at Statewide Power. It’s nice to finally find a Tradie that rolls up when he says and gets the job done.

    – Danielle, Edaggee Station

    Jason and his team at Statewide Power have been looking after our complex since 2017 and we have never been disappointed with their professionalism and service.

    – Lorraine, Harvey Norman Bunbury

    I have used Statewide Power on multiple occasions for a variety of electrical jobs, both big and small, at our house in Bunbury. They are always friendly, professional and punctual.

    – Craig and Joanne Clifton

    Scroll to Top